PAICAR ULTRA SNOW FOAM - PH14 - 1 Kg

High-performance concentrated alkaline pre-wash solution, specially formulated for treating heavily soiled vehicles or those being prepared for polishing and protective coating processes.

Due to its high degreasing and decontamination capacity, it rapidly dissolves stubborn dirt, road film, grease, organic residues, and environmental contaminants, preparing the surface for a safer and more efficient manual wash.

Its rapid action helps reduce the risk of swirl marks and micro-scratches, as it removes the bulk of impurities before mechanical (wash mitt) washing.

It is particularly suitable for: preparation before polishing, industrial or work vehicles, and cars exposed to extreme environmental conditions.

Main Features

• Concentrated alkaline formula: with rapid action

• Effectively removes: grease, road film, organic residues, and heavy contamination

• Reduces scratching risk: protects the paintwork during the manual wash phase

• Ideal for preparation: preps the surface for polishing or the application of protection

• Versatile application: can be used with a foam cannon or pressure sprayers

Recommended Dilution

• Foam Cannon: from 1:10 to 1:15, depending on the level of dirt

• Pressure sprayer: from 1:100 to 1:150, depending on the level of dirt

Do not use undiluted. Adjust dilution according to the degree of dirt present.

Instructions for Use

1. Shake the container well before use.

2. Dilute the product in a foam cannon or pressure sprayer.

3. Apply evenly to the entire exterior surface of the vehicle, working from bottom to top.

4. Allow the product to act for a maximum of 60 seconds.

5. Do not let the product dry on the surface.

6. Rinse thoroughly with pressurized water.

7. Continue with the manual (contact) wash.

Warnings

• Do not use on hot surfaces or in direct sunlight.

• Do not let the product act for more than 60 seconds.

• Do not let the product dry on the surface.

• Avoid contact with delicate unprotected surfaces (e.g., raw aluminum).

• Store in a cool and dry place.

• Always test the product on a small, inconspicuous area before full application.

Technical Specifications

• Compatible surfaces: Rims, Glass, Bodywork, Rubber, Polycarbonate

• Dilution ratio: 1:10 – 1:15 in Foam Cannon | 1:100 – 1:150 in Sprayer

• pH at 20°C: 14 (alkaline)

• Density: 1.16 Kg/L at 20°C

• Color: Yellow / Green

• Scent: Fruity and Woody

• Storage temperature: 5–30°C