PAICAR - 02 FAST CUT 250g

Versatile Medium-Cut abrasive compound: eliminates hazing, medium defects, and sanding marks (P2000–P3000). It is excellent as an intermediate correction step or as a "One Step" solution. It provides a uniform finish without holograms. It is easy to use, does not generate dust, and does not leave persistent residue.

--- CUT FINISH

Product Description

Medium-cut abrasive compound designed to easily remove medium-depth defects, haze, and imperfections caused by daily wear, including sanding marks between P2000 and P3000.

It is ideal as an intermediate step after a heavy-cut compound, but thanks to its excellent finishing capability, it can also be used as a "One Step" solution on paints in good condition. Its advanced water-based formula, free of silicone or fillers, provides a clean, uniform finish without haze, ensuring smooth and controlled processing, without generating dust or leaving residue.

It applies easily and wipes off extremely effortlessly, optimizing working time and reducing operator effort, thanks to its dust-free technology.

It is compatible with medium foam pads for a more refined finish or microfiber pads for more aggressive correction, adapting perfectly to both rotary and dual-action (orbital) polishers.

Instructions for Use

1. Surface Preparation

• Ensure the surface is clean and properly decontaminated (thorough wash, and if necessary, clay bar decontamination).

• Dry the panel completely before beginning the polishing process.

2. Choosing the Pad

• For more aggressive correction: use a microfiber pad with a dual-action (orbital) polisher.

• For a superior finish: use a medium foam pad with a dual-action (orbital) polisher.

3. Product Application

• Shake the container well.

• Apply 3–4 drops of product onto the pad.

• Spread the compound over the panel with the machine turned off, dabbing the surface lightly.

4. Working Process

• Start spreading PAICAR 02 at the lowest speed setting.

• Gradually increase the speed to activate the abrasive action.

• Work on areas of approximately 40×60 cm (about the size of 6 pads), using cross-hatch passes (horizontal and vertical).

• Apply light pressure, keeping the pad perfectly flat on the surface.

5. Inspection of Results

• After 3–4 passes, stop the polishing cycle (approximately 2 minutes).

• Remove residue with a clean, soft microfiber towel.

• Inspect the panel with an inspection lamp to verify defect removal.

6. Finishing

• If necessary, continue with PAICAR 03 to enhance gloss and color depth.

• Then protect the surface with a sealant or wax.

Pro Tips

• Always work in controlled environments, avoiding direct sunlight.

• Clean or replace the pad regularly to avoid saturation.

• Always test the product on a small, inconspicuous area before working on the entire vehicle.

Technical Specifications

• Cut Level: 8/10

• Finish Level: 8/10

• Color: White

• Odor: Light and pleasant

• Physical State: Creamy consistency

• Storage Temperature: 5–30°C