PAICAR PREP - 1 Kg

Specialized cleaning and surface preparation solution (panel prep / degreaser), formulated to remove oils from polishing pastes, compound residues, and light contaminants before applying ceramic coatings, sealants, or waxes.

Its targeted action eliminates any barrier between the surface and the protective product, ensuring optimal adhesion and maximum durability.

Due to its balanced composition of fast-evaporating solvents and gentle surfactants, this product is safe on all exterior surfaces: paint, glass, plastic, trim elements, PPF film, and previously ceramic-coated surfaces.

Unlike simple isopropyl alcohol (IPA) based solutions, its advanced formula lifts and removes residues without redistributing them on the panel, leaving the surface perfectly clean, dry, and free of streaks or spots.

Main Features

• Deep cleaning: removes polishing oils, waxes, abrasive pastes, and light contamination

• Maximizes adhesion: promotes optimal anchoring of ceramic coatings, sealants, and waxes

• Fast evaporation: residue-free formula, leaves no streaks or spots

• Total versatility: safe on paint, glass, plastic, PPF film, and ceramic coatings

• Clean formula: free of silicone, wax, or gloss enhancers

Recommended Dilution

• Undiluted (Pure): for maximum effectiveness on surfaces with persistent residues

• Dilution up to 1:1: for maintenance or delicate surfaces

Instructions for Use

1. Shake the container well before use.

2. Spray directly onto the panel or onto a clean microfiber towel.

3. Wipe the surface using linear motions, frequently turning the towel to a clean side to avoid redistributing residues.

4. Ensure the surface is completely dry before applying any protective product.

Warnings

• Do not use on hot surfaces.

• Store in a cool, dry place.

• Always test the product on a small, inconspicuous area before full application.

Technical Specifications

• Compatible surfaces: Rims, Glass, Bodywork, Polycarbonate, Exterior plastic, Rubber, Trim elements

• Dilution ratio: Undiluted (for rims, glass, bodywork, plastic, rubber) | 1:1 dilution (for delicate surfaces and trim)

• pH at 20°C: 7.8 (neutral / slightly alkaline)

• Density: 1.00 g/cm³ at 20°C

• Color: Blue

• Fragrance: Typical / Characteristic

• Storage temperature: 5–30°C